Winter MULTIMAX 300, Руководство по эксплуатации

Страница: 8 / 74

MULTIMAX 300
Chapter 1: INTRODUCTION
2
The operator should wear leather gloves and leather apron, and should stand
at the side of the machine. Never stand in line with the sawing lines.
Never touch, either directly or indirectly, any moving parts of the machine
while in operation, or wood which is presently being sawed.
Before sawing, the wood should be cleared of any foreign objects such as
metal, sand, and earth.
Never feed two or more planks of wood into the machine at the same time.
Never use wood of thickness greater than 110mm or length shorter than
300mm.
When making a change in the thickness of wood, the height of the pressure
rollers must be readjusted to the proper position. This is to ensure the rollers
maintain a firm grip so that the wood being cut cannot come flying out.
If using planks that have not had the edges squared, the wider side should
always be face down on the caterpillar chain.
Planks which are warped crosswise rather than completely flat should be
placed with the convex side face down on the caterpillar chain.