Winter MULTIMAX 300, Руководство по эксплуатации

Страница: 21 / 74

MUL TIMAX 300
Chapter 2: INSTALLATION
15
2-5 START-UP TEST
After the machine has been installed by following the steps described above and a
check has been made to ensure that there are no obstructions surrounding the machine,
the following start-up test should be performed:
1.
Be sure the power supply is connected and the power indicator will light up.
2.
Observe the pressure roller housing. If the housing goes up while push the
pressure roller housing rising button, it means the power wiring is correct. If the
housing goes down while push the rising button,
Shut Off the Power
Immediately
to stop the machine. After reversing two (2) phase cables, restart
and test run again.
3. When make sure the pressure roller housing and the corresponding rising button
and lower button are working correctly, the user can start the machine for
operation.