Winter MULTIMAX 300, Руководство по эксплуатации

Страница: 37 / 74

MULTIMAX 300
Chapter 4: MAINTENANCE
31
Every
2400-2500
working hours:
◎
After every 2400-2500 working hours, should use a grease gun add grease to
the bearings of saw arbors. Before adding grease, the outlet of grease gun
should be cleaned completely to avoid impurities entering the bearings with
grease.
◎
We suggest using the following grease:
Name Grease
Use for Bearing
Viscosity cst
@
40
℃
NLGI NO.2
Brand
SKF LGLT2
Mobil Mobillux 2
ESSO Estan No.2
SHELL Alvania No.2
◎
The inlets for adding grease are shown in the diagrams below:
1.
Open the door of saw arbor. There are two grease inlets located on the
upper of outer shell of saw arbor. Also, there is a grease inlet on the
elevating nut of pressure rollers housing.
2. Open the back door of the machine base. There is one grease inlet located
on the outer shell of saw arbor beside the pulley, and one located on the
pivot of saw arbor.