Winmate FA33 Скачать руководство пользователя страница 49

Страница: 49 / 54

3 - 19

BIOS Setup

Resources Controlled By

If set at Auto, the BIOS arranges all system resources. If there exists con-

flict, select Manual. The options are: Auto (ESCD), Manual.

The manual options of

IRQ- / DMA

- assigned to are: PCI/ISA PnP, Legacy

ISA.

PNP OS Installed

If your operating system is a Plug-and-Play one, such as Windows NT,

Windows 95, select Yes. The options are: No, Yes.

PCI/VGA Palette Snoop

Set this feature to be enabled if any ISA adapter card installed in the

system requires the VGA palette snoop function.

The options are: Disabled, Enabled.

Assign IRQ For VGA

If your PCI VGA card does not need an IRQ, select Disabled; therefore, an

IRQ can be released for the system use.

The options are: Enabled, Disabled.

Assign IRQ For USB

If your USB devices do not need an IRQ, select Disabled; therefore, an IRQ

can be released for the system use.

The options are: Enabled, Disabled.

SLOT 1/2/3 Use IRQ No.

This feature allows you to assign the PCI IRQ numbers for PCI slots.

Selecting the default, Auto, allows the PCI controller to automatically allo-

cate the IRQ numbers.

The options are: Auto, 3, 4, 5, 7, 9, 10, 11, 12, 14, 15.

FDD IRQ Can Be Free

This feature allows you to choose if the FDD IRQ is able to be freed up.

If set at Yes, it does not allow the IRQ to be free.

The options are: No, Yes.

Содержание FA33























































Результаты поиска

Содержание FA33

Отзывы:

Бренды по названию

Популярные бренды

Winmate FA33, Руководство пользователя

Результаты поиска

Содержание FA33

Отзывы:

Бренды по названию

Популярные бренды