Winmate FA33, Руководство пользователя

Страница: 47 / 54

3 - 17
BIOS Setup
LPT & COM
LPT/COM enables the power management timers when a no activity event
is detected in the LPT and COM ports. LPT (COM) enables the power
management timers when a no activity event is detected in the LPT (COM)
ports. NONE to disable the PM timer even if a no activity event is detected.
The options are: LPT/COM, LPT, COM, NONE.
HDD & FDD
ON will enable the power management timers when no activity event is
detected in the hard drive and floppy drive. OFF disables the PM timer
even if no activity event is detected. The options are: OFF, ON.
PCI Master
To set this feature at ON activates that Power Management feautre (PM)
wake-up event for the PCI bus master card.
The options are: OFF, ON.
PowerOn by PCI Card
When set at Enabled, any PCI-PM event awakes the system from a PCI-
PM controlled state.
The options are Disabled or Enabled.
Power On By Modem/Lan
When set at Enabled, an input signal comes from modem or from the other
client/server on the LAN awakes the system from a soft off state if con-
nected over LAN. The options are Disabled or Enabled.
Power On By Alarm
Enabled allows you to set the time the system will be turned on from the
system power-off status. The options are: Enabled, Disabled.
Date (of Month)
This feature allows you to set the day of the alarm starts when the RTC
Alarm Resume From Soft Off is set to be Enabled. The options are: 0, 1..31.
Resume Timer (hh:mm:ss)
If an ATX power supply is installed and when RTC Alarm Resume is En-
abled, this feature allows you to set the time of the alarm starts when the
RTC Alarm Resume From Soft Off is set to be Enabled.
The options are: 7: 0: 0 (Default). hh ( hour ) - 0, 1, 2,.., 23; mm ( minute ) - 0,
1, 2,..,59; ss ( second ) - 0, 1, 2,..,59.