Winmate FA33, Руководство пользователя

Страница: 45 / 54

3 - 15
BIOS Setup
Power Management
This item allows you to adjust the power management features.
Select User Define for configuring your own power management features.
Min Saving initiates all predefined timers in their minimum values. Max
Saving, on the other hand, initiates maximum values. The options are: User
Define, Min Saving, Max Saving.
HDD Power Down
The option lets the BIOS turn the HDD motor off when system is in Sus-
pend mode. Selecting 1 Min..15 Min allows you define the HDD idle time
before the HDD enters the Power Saving Mode.
The options 1 Min..15 Min will not work concurrently. When HDD is in the
Power Saving Mode, any access to the HDD will wake the HDD up.
The options are: Disable, 1 Min..15 Min.
ACPI Suspend Type
This item allows you to select suspend mode when the system in ACPI
mode. The options are: S1 (POS), S3 (PTR).
Doze Mode
When disabled, the system will not enter Doze mode. The specified time
option defines the idle time the system takes before it enters Doze mode.
The options are: Disable, 10, 20, 30, 40 Sec, 1, 2, 4, 6, 8, 10, 20, 30, 40 Min, 1
Hour.
Suspend Mode
When disabled, the system will not enter Suspend mode. The specified
time option defines the idle time the system takes before it enters Suspend
mode. The options are: Disable, 10, 20, 30, 40 Sec, 1, 2, 4, 6, 8, 10, 20, 30, 40
Min, 1 Hour.
before it enters Doze mode, Standby mode, or Suspend mode. If the APM
is installed, it will prompt the BIOS to set the system into power saving
mode when all tasks are done. The options are: No, Yes.
PM Control by APM
The option No allows the APM (Advanced Power Management) specifi-
cation be ignored. Selecting Yes will allow the BIOS wait for APM’s prompt