manualshive.com logo in svg

Winmate FA33, Руководство пользователя

Поделиться
Скачать
Winmate FA33 Скачать руководство пользователя страница 43

3 - 13

BIOS Setup

Onboard Parallel Port

Allows you to select from a given set of parameters if the parallel port uses

the onboard I/O controller.

The options are: 378/IRQ7, 278/IRQ5, 3BC/IRQ7, Disabled.

Onboard Parallel Port Mode

Allows you to connect with an advanced printer.

The options are: Normal, EPP, ECP, ECP/ ECP.

ECP Mode Use DMA

This feature allows you to select Direct Memory Access (DMA) channel if

the ECP mode selected. The options are: 3, 1.

Parallel Port EPP Type

This feature allows you to select the EPP type for the parallel port.

The options are: EPP1.9, EPP1.7.

Onboard Legacy Audio

Allow use the audio function under DOS mode.

The options are: Enabled, Disabled.

Sound Blaster

This feature allows you to select the Sound Blaster, if the onboard Legacy

audio chosen. The options are: Enabled, Disabled.

SB I/O Base Address

This feature allows you to select the SB I/O base address, if the onboard

Legacy audio chosen. The options are: 220H, 240H, 260H, 280H.

SB IRQ Select

This f

eature allows you to select the SB IRQ, if the onboard Legacy audio

chosen. The options are: IRQ 5, IRQ 7, IRQ 9, IRQ 10.

SB DMA Select

This feature allows you to select the SB DMA channel, if the onboard

Legacy audio chosen.

The options are: DMA 1, DMA 2, DMA 3, DMA0.

Содержание FA33























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды