manualshive.com logo in svg

Winmate FA33, Руководство пользователя

Поделиться
Скачать
Winmate FA33 Скачать руководство пользователя страница 41

3 - 11

BIOS Setup

Secondary Slave PIO

Allows an automatic or a manual configuration of the PCI secondary IDE

hard disk (slave) mode. The options are: Auto, Mode 0, Mode 1, Mode 2,

Mode 3, Mode 4.

Primary Master UDMA

Allows you to select the first PCI IDE channel of the first master hard disk

mode or to detect it by the BIOS if the hard disk supports UDMA (Ultra

DMA, faster than DMA). The options are: Auto, Disable.

Primary Slave UDMA

Allows you to select the first PCI IDE channel of the first slave hard disk

mode or to detect it by the BIOS if the hard disk supports UDMA (Ultra

DMA, faster than DMA). The options are: Auto, Disable.

Secondary Master UDMA

Allows you to select the second PCI IDE channel of the secondary master

hard disk mode or to detect it by the BIOS if the hard disk supports UDMA

(Ultra DMA, faster than DMA). The options are: Auto, Disable.

Secondary Slave UDMA

Allows you to select the second PCI IDE channel of the secondary slave

hard disk mode or to detect it by the BIOS if the hard disk supports UDMA

(Ultra DMA, faster than DMA). The options are: Auto, Disable.

Init Display First

When you install an AGP VGA card and a PCI VGA card on the board, this

feature allows you to select the first initiation of the monitor display from

which card. The options are: PCI Slot, AGP.

OnChip USB

Set at Enabled if you use some devices, such as a USB keyboard. If set at

Disabled, the system allows you to use your USB keyboard to boot up and

to enter the BIOS setting menu to enable this featrue; but once missed the

booting stage with this feature disabled, your USB devices will not work.

The options are: Enabled, Disabled.

Содержание FA33























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды