manualshive.com logo in svg

Winmate FA33, Руководство пользователя

Поделиться
Скачать
Winmate FA33 Скачать руководство пользователя страница 35

3 - 5

BIOS Setup

Boot Up Numlock Status

When set to On, allows the BIOS to automatically enable the Num Lock

Function when the system boots up. The options are: On, Off.

Typematic Rate Setting

The term typematic means that when a keyboard key is held down, the

character is repeatedly entered until the key is released.

The options are: Disabled, Enabled.

Typematic Rate (Chars/Sec)

This feature is available only if the above item, Typematic Rate Setting, is

set at Enabled. Sets the rate of a character repeat when the key is held

down. The options are: 6, 8, 10, 12, 15, 20, 24, 30.

Video BIOS Shadow

Allows the BIOS to copy the video ROM code of the add-on video card to

the system memory for faster access.

The options are: Enabled, Disabled.

C8000-CBFFF Shadow to DC000-DFFFF Shadow

Allows the BIOS to copy the BIOS ROM code of the add-on card to the

system memory for faster access. To use this options, it is needed to know

the memory address range used by the BIOS ROM of each card.

The options are: Enabled, Disabled.

Typematic Delay (Msec)

This feature is available only if the item, Typematic Rate Setting, is set at

Enabled. Sets the delay time before a character is repeated.

The options are: 250, 500, 750, 1000 millisecond.

Security Option

Allows you to set the security level of the system.

The options are: Setup, System.

OS Select (For DRAM  > 64MB)

If your operating system (OS) is OS/2, select the option OS2. Otherwise,

stay with the default setting Non-OS2.

The options are: Non-OS2, OS2.

Содержание FA33























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды