manualshive.com logo in svg

Winmate FA33, Руководство пользователя

Поделиться
Скачать
Winmate FA33 Скачать руководство пользователя страница 37

3 - 7

BIOS Setup

Memory Hole

When you install a Legacy ISA card, this feature allows you to select the

memory hole’s address range of the ISA cycle when the processor ac-

cesses the selected address area. Please read your card manual for detail

information. When disabled, the memory hole at the 14MB (or 15MB)

address will be treated as a DRAM cycle when the processor accesses the

14~16MB (or 15~16MB) address area.

The options are: 15M - 16M, Disabled.

P2C/C2P Concurrency

This feature allows users to set PCI/AGP Master-to-CPU/ CPU-to-PCI/

AGP Slave concurrent. The options are: Enabled, Disabled.

System BIOS Cacheable

When enabled, allows the ROM area F000H-FFFFH to be cacheable when

cache controller is activated. The options are: Enabled, Disabled.

Video RAM Cacheable

When enabled, allows the system to use the video RAM from cache RAM,

instead of the slower DRAMs or ROMs.

The options are: Enabled, Disabled.

AGP-4X Mode

This feature allows user to select the AGP mode be to 2x or 4x when an

AGP add-in card installed. However, when set at Enabled and the AGP

card only support 1x mode, the system will fall back 1x mode automatically.

The options are: Enabled, Disabled.

AGP Driving Control / AGP Driving Value

These two features allow user to improve the performance of AGP card

manually by pressing Page Down/Page UP key if necessary.

The options of AGP Driving Control are: Auto, Manual.

AGP Aperture Size

It allows you to select the main memory frame size for AGP use.

The options are 4M, 8M, 16M, 32M, 64M, 128M.

Содержание FA33























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды