manualshive.com logo in svg

Winmate FA33, Руководство пользователя

Поделиться
Скачать
Winmate FA33 Скачать руководство пользователя страница 26

2 - 16

FA33 Mainboard Manual

Speaker 

is connected with the case speaker.

Reset 

is connected to the reset switch. Push this switch to reboot the system

instead of turning the power switch off  and on.

IDE Activity LED 

is connected to the IDE device indicator. This LED will blink

when the hard disk drives are activated.

Power LED  

is connected with the system power indicator to indicate whether

the system is on/off. It will blink when the system enters suspend mode.

Green Switch 

is connected with suspend mode switch.

Power Switch 

is connected with remote power (soft power) switch. Push this

switch This switch allows the system to be turned on and off rather than using

the power supply switch.

Front Panel Block Connector

This block connector includes the connectors for linking with IDE LED, power

LED, power button, suspend button, reset button and speaker on the front

panel of the system case. Please identify polarities of plug wires for the case

speaker and LEDs. Please ask vendor about this information when you buy

them and install the system by yourself. The plug wires’ polarities of these

buttons will not affect the function.

Содержание FA33























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды