Wilo Control EC-Fire, Инструкция по установке и эксплуатации

Страница: 71 / 114

English
Installation and operating instructions Wilo-Control EC-Fire 61
Return delivery/storage
For shipping purposes, the switchgear must be
packaged such that it is protected against impact
and is waterproof.
Please also refer to the “Transport and temporary
storage” section.
12.2 Disposal
Proper disposal of this product will avoid damage
to the environment and risks to personal health.
• Use the services of public or private waste disposal
companies, or consult them concerning the dis-
posal of the product or parts of it.
• For more information about proper disposal,
please contact your local council or waste disposal
office or the supplier from which you obtained the
product.
NOTICE
Further notes on recycling can be found at
www.wilo-recycling.com.
13 Appendix
13.1 Overview of display symbols
There is at least one current (unacknowledged) error message
Operating mode “p-c”
Standby: The switchgear is switched on and ready for operation; no pump is switched on
Pumps have switched off due to opening of the contact at the “Ext. Off” input
The water level has fallen below the dry run level
Pump is available and ready for operation
1. Symbol lights up: pump is in operation
2. Symbol flashes: pump fault
One pump is defined as a standby pump
Parameter entry not possible:
1. Parameter entry/change blocked
2. The accessed menu is only a value display
ModBus is activated