WILLIAMSWARN BrewMaster Скачать руководство пользователя страница 70

Страница: 70 / 80

This product is designed to be used with 1.0-1.5 kg (2.2-

3.3lbs) of WilliamsWarn Light Dry Malt Extract and water to

make 23 Litres (6 US Gallons/5 Imp. Gallons) of wort. Original

Gravity of 1.040-1.048 (10°P- 12°P), fermented to a Final

Gravity of about 1.009 (2.3°P), resulting in 4.1-5.2% alcohol

by volume, 37 Bitterness Units and 6 SRM/12 EBC colour.

Ferment at 15°C/59°F for 3 days and then increase to 18°C/64°F

for a diacetyl rest to complete fermentation after another 3 days.

Cooling can be put on at Day 6 when SG should be about 1.009.

As an option, hop aroma and taste can be elevated if the brewer

makes a hop tea of 1-2 oz. (28-56g) of any Czech (or German)

hops in a French coffee press. Add approx. 900ml of hot boiled

water to the hops, stir and then steep for 20 minutes. Plunge

the solids and add the green, filtered hop tea to the mix of

ingredients in your fermenter (before adding the yeast). Download

the WilliamsWarn User Manual from our website for more details.

DRY APPLE CIDER

A pleasant and appealing Cider.

Our Apple Cider is made from the highest quality apples.

The result is a very dry, clean and crisp cider. The apple flavours

are light and pleasant and the overall taste is refreshing.

The yeast under the lids is a 11g pack of Fermentis S-04 yeast

and a 10g sachet of yeast nutrient is also supplied.

This product is designed to be used as two cans of

WilliamsWarn Dry Cider in order to produce a cider with a good

apple flavour. These two cans should be made up to 23 litres of

juice (5 Imperial gal/6 US gal) by adding water, which should

then be pitched with the yeast after rehydration in water.

Original Gravity: 1.038 (9.5°P). Ferment until Final Gravity is

1.010 (2.5°P) and put the cooling on. DO NOT CLARIFY. The

yeast will settle with the cooling and the cider will be clear.

Alcohol by Volume: 3.7%. Ferment to 1.007 for a dryer cider

of 4.06%

Ferment at 23°C/73°F.

DRY STOUT

A true Dry Stout with a compelling personality.

Our Dry Stout has a black appearance from the crystal malts,

roasted malts and roasted barley employed in the grain mix. The

result is a great Dry Stout that has liquorice, roasted coffee and

chocolate flavours dominating. The prominent hop bitterness

level helps elevate the dryness, which comes from the roasted

un-malted barley used.

The yeast under the lid is an 11.5g pack of Fermentis S-04

ale yeast.

This product is designed to be used with 1.0-1.5 kg (2.2-

3.3lbs) of WilliamsWarn Light Dry Malt Extract and water to

make 23 Litres (6 US Gallons/5 Imp. Gallons) of wort. Original

Gravity of 1.040-1.048 (10°P- 12°P), fermented to a Final

Gravity of about 1.011 (2.8°P), resulting in 3.9-5.0% alcohol

by volume, 32 Bitterness Units and 50 SRM/100 EBC colour.

Ferment at 23°C/73°F.

DUTCH PILSNER

This is a noble brew with a crisp finish.

Our Dutch Pilsner is straw-coloured in appearance with a

moderate, lingering bitterness. The yeast employed is a classic

strain that leaves a slightly estery aroma that is typical of

Pilsners from The Netherlands. When used with our light DME

to make an all-malt beer, the combination of ingredients makes

a Pilsner very true to the region.

The yeast under the lid is an 11.5g pack of Fermentis S-23

lager yeast which is commonly used by large breweries in

Western Europe.

This product is designed to be used with 1.0-1.5 kg (2.2-

3.3lbs) of WilliamsWarn Light Dry Malt Extract and water to

make 23 Litres (6 US Gallons/5 Imp. Gallons) of wort. Original

Gravity of 1.040-1.048 (10°P- 12°P), fermented to a Final

Gravity of about 1.009 (2.3°P), resulting in 4.1-5.2% alcohol

by volume, 22 Bitterness Units and 3 SRM/6 EBC colour.

Ferment at 15°C/59°F for 3 days and then increase to

18°C/64°F for a diacetyl rest to complete fermentation after

another 3 days. Cooling can be put on at Day 6 when SG should

be about 1.009.

ENGLISH BROWN ALE

An authentic Brown Ale with a dark-fruit character.

Our English Brown Ale has a dark brown appearance from a

range of speciality malts employed in the recipe. The resulting

beer has an array of flavours that includes raisins, plums, figs,

nuts, biscuits, caramel and toffee, that last into the finish. The

hops provide a moderate level of bitterness that helps balance

the dark-fruit malt flavours.

The yeast under the lid is an 11g pack of Fermentis S-04

ale yeast.

This product is designed to be used with 1.0-1.5 kg (2.2-

3.3lbs) of WilliamsWarn Light Dry Malt Extract and water to

make 23 Litres (6 US Gallons/5 Imp. Gallons) of wort. Original

Gravity of 1.040-1.048 (10°P- 12°P), fermented to a Final

Gravity of about 1.011 (2.8°P), resulting in 3.9-5.0% alcohol

by volume, 18 Bitterness Units and 25 SRM/50 EBC colour.

Ferment at 23°C/73°F.

ENGLISH PALE ALE

A full-bodied English Pale Ale.

Our English Pale Ale has an amber appearance with a moderate

bitterness. Technically, within the BJCP Style Guidelines it is

a Standard Bitter – the lightest of the English bitter types with

respect to alcohol content, colour and bitterness. This beer has

a firm malty start, a touch of fruitiness from the yeast and a long

dry finish from the hops.

The yeast under the lid is an 11g pack of Lallemand

Nottingham Ale yeast.

This product is designed to be used with 1.0-1.5 kg (2.2-

3.3lbs) of WilliamsWarn Light Dry Malt Extract and water to

make 23 Litres (6 US Gallons/5 Imp. Gallons) of wort. Original

Gravity of 1.040-1.048 (10°P- 12°P), fermented to a Final

Gravity of about 1.010 (2.5°P), resulting in 4.0-5.1% alcohol

Содержание BrewMaster

















































































Результаты поиска

Содержание BrewMaster

Отзывы:

WILLIAMSWARN BrewMaster, Руководство пользователя, Страница: 70 / 80

Результаты поиска

Содержание BrewMaster

Отзывы: