WILLIAMSWARN BrewMaster Скачать руководство пользователя страница 35

Страница: 35 / 80

1. The bottle should be ½ to ¾ full of clarified sediment with

a clear beverage layer seen at the top of the bottle (See

Figure 54).

2. Close the vessel valve. Unscrew the sediment bottle (see

Figure 42). It screws off clockwise looking down on the

bottle. It is under pressure so there will be a small release

of pressure as it is unscrewed but it is full of liquid, so it

will be minimal. However it is advisable to unscrew the

bottle with one of your hands wrapped around the top part

of the bottle, to block any small spraying of beverage.

3. When you have unscrewed the bottle, place it in the

stainless steel bowl under the tank (see Figure 43). Then

take the 500ml spray bottle and spray up into the vessel

valve to remove beverage residue from the under-side of the

valve and valve thread (see Figure 44). Let the water drip

onto the bowl. Then using the removable stainless steel

bowl under the vessel to prevent dripping onto the floor,

take the sediment bottle and bowl to a sink (Figure 45) and

dump the sediment down the drain and rinse the sediment

bottle and stainless bowl both well with water.

4. Then put the bowl back under the tank.

5. For safety reasons, we recommend putting the rinsed and

empty sediment bottle back onto the brewery but do not

open the vessel valve! It can stay there, empty under the

closed valve, as a safety device should someone or some

child accidently open the vessel valve.

6. The vessel temperature is set at 1°C/34°F for clarification

so if you'd like to increase the temperature now (e.g. to

consume at 8°C/46°F for an English Ale) then do so now.

STAGE SIX:

DISPENSE

THE BEVERAGE

Please read Appendix 9 for background
information and principles regarding
dispensing the beverage.

Dispense can take place 24 hours after
the second clarifications but for extra
clarity we recommend waiting 1 ½ days.
So in general, you should be enjoying
the beverage at Day 7 for ales, Day 9 for
lagers and Day 4½ for our cider.

Fig. 32

Fig. 54

Fig. 55

Содержание BrewMaster

















































































Результаты поиска

Содержание BrewMaster

Отзывы:

Похожие инструкции для BrewMaster

Бренды по названию

Популярные бренды

WILLIAMSWARN BrewMaster, Руководство пользователя

Результаты поиска

Содержание BrewMaster

Отзывы:

Похожие инструкции для BrewMaster

Бренды по названию

Популярные бренды