Will Burt Inflexion Plus 1.8, Руководство по эксплуатации

Страница: 59 / 104

PAGE 57 OF 102
INFLEXION PLUS
OPERATING INSTRUCTIONS
TP-5211901-C
JUNE 2021
6.10.1 Using the Auto Stow® Feature
Using the Auto Stow
®
feature does not require the operator to stop the mast exactly in the
saddle. The mast can be auto-stowed from any position including 90°, partially extended, or fully
extended. Auto Stow
®
feature first moves the positioner to the stowed position before stowing
the mast. To use the Auto Stow® feature:
1. Press "Mast Down" twice quickly in successive depressions (two depressions within ½
second). The mast will pan and tilt to the home position and lower (if not already there) to the
stowed position. This automatic sequence can be aborted by pushing any of the buttons on
the controller at any point during the Auto Stow®. If a button is pressed, the mast will not stow
by itself, and will await further operator input. The mast will power down automatically after
stowing.
2. Visually inspect that the mast is properly stowed and powered down. Ensure that the mast
will not bounce as the vehicle drives down the road. Once stowed, the Mast Stowed Safety
Interlock Contact signals it is safe to move the vehicle.
3. Store Remote Controls if used so they will not be damaged during transportation.
6.10.2 Using the Mast Down Button
Another method used to stow the mast is to press and hold "Mast Down" on the controller. This
method is not as reliable as using the Auto Stow® feature. Care must be taken to ensure that the
operator does not release the button before the mast is completely stowed and powered down. If
the mast is not completely stowed, equipment may be damaged during transportation.
To stow the mast using "Mast Down":
1. Press and hold "Mast Down" until the mast stops and the "Mast Down" LED is turned off,
which indicates that the mast has powered-down. The mast will lower (if not already there) to
the home position, and then stow. Once stowed, the Mast Stowed Safety Interlock Contact
signals it is safe to move the vehicle.
2. Visually inspect that the mast is properly stowed and powered down. Ensure that the mast
will not bounce as the vehicle drives down the road. Once stowed, the Mast Stowed Safety
Interlock Contact signals it is safe to move the vehicle.
3. Store Remote Controls if used so they will not be damaged during transportation.