Will Burt Inflexion Plus 1.8, Руководство по эксплуатации

Страница: 58 / 104

PAGE 56 OF 102
INFLEXION PLUS
OPERATING INSTRUCTIONS
TP-5211901-C
JUNE 2021
6.9 Lowering the Mast
Once the mast has been extended, pressing "Mast Down" will lower the mast. Continue to press
"Mast Down" until the mast reaches the desired height and then release the button.
6.10 Stowing the Mast
The "stowed" position is also called the "nested" position. The stowed position is the position of
the mast when it is folded down and firmly seated in the saddle. The mast is considered stowed
when the Mast Stowed Switch is closed, and the brief over current condition is met when the
mast is driven into the saddle.
The mast can be stowed by using:
• Auto Stow®
• “Mast Down”
• Emergency Stow With Power
• Emergency Stow Without Power
All power is automatically removed after the mast contacts the saddle and the current limit is
reached. To operate the mast again, the system must be re-initiated. This is a safety feature that
prevents the mast from being inadvertently raised to comply with standards.
It is the responsibility of the operator to ensure the payload is in the “home” position before
stowing the mast. The mast will not stow unless it is in the stowed position. When transporting, it
is the responsibility of the operator to properly secure the mast for vehicle travel.