Will Burt Inflexion Plus 1.8, Руководство по эксплуатации

Страница: 52 / 104

PAGE 50 OF 102
INFLEXION PLUS
OPERATING INSTRUCTIONS
TP-5211901-C
JUNE 2021
6.3 Remote Control Functions
Using the Remote Control, the operator can perform an emergency stop and move the mast up
and down. The following are the Remote Control buttons:
6.3.1 Presets
The system is capable of having two preset positions as follows:
• Stowed (Set at the factory to the Auxiliary Light button on the HHRC)
• Unstowed (Optionally set by the customer to the Lights button on the HHRC)
The stowed position is the position the positioner goes to before the system is stowed to ensure
that the payload is properly oriented for stowing and transportation. Programing of the stowed
position is done at the factory.
To program a stowed position:
1. Pan and tilt the positioner to the desired position.
2. Press and hold the Pan Left and Pan Right buttons simultaneously (Figure 6-1).
3. Press the Auxiliary Light button (Figure 6-1). The stowed position is now set.
Figure 6-1 Setting the Preset Stowed Position
Pan Left Pan Right
Auxiliary Light
Hold the Pan Left and Pan Right
Buttons Simultaneously
Press the Auxiliary Light Button