WIKA CPC8000-H, Руководство по эксплуатации

Страница: 71 / 85

8. Remote Operation
WIKA Operating Instruction High Pressure Controller, Model CPC8000-H 71
GB
1
42
3
59
9
3
.0
0/
0
6/2
0
17
/GB
Item Command or Query Response/Function
UNIT
46. :NAME<n>? Returns the name of the unit with index n.
47. :FACTOR<n>? Returns the conversion factor to the current unit
with index n.
48. :PRESsure<n> Sets the pressure units.
49. :PRESsure? Returns the pressure units.
OUTPut
50. :STATeON/OFF/1/0 ON or 1 = Control OFF or 0 = Measure
51. :STATe? Returns 0 for measure 1 for control.
52. :MODE MEASure/CONTrol/VENT Sets the mode indicated.
53. :MODE? Returns the mode string.
54. :STABle? Returns 1 if stable 0 if not.
55. :AUTOvent ON/OFF/1/0 Puts the unit in the Vent mode if true
56. :AUTOvent? Returns the state of the Vent mode.
57. :AUTORange ON/OFF/1/0 Turns autorange on or off
58. :AUTORange?
Returns “ON” or “OFF”
[SOURce]
:PRESsure
[:LEVel]
[:IMMediate]
59. [:AMPLitude] <n> Sets the setpoint.
60. [:AMPLitude]? Returns the setpoint.
61. :SLEW <n> Sets the slew rate setpoint.
62. :SLEW? Returns the slew rate setpoint.
63. :TOLerance <n> Sets the stable window.
64. :TOLerance? Returns the stable window.
CALCulate
:LIMit
65. :LOWer<n> Sets minimum control limit.
66. :LOWer? Returns minimum control limit.
67. :UPPer<n> Sets maximum control limit.
68. :UPPer? Returns maximum control limit.
:SYSTem
69.
:DETECT
SLOW/FAST/CANCEL Control autotune (NOT USED NOW).
70. :DETECT? Returns state of control autotune.