2. Safety
WIKA Operating Instruction High Pressure Controller, Model CPC8000-H
7
GB
1
42
3
59
9
3
.0
0/
0
6/2
0
17
/GB
2.2 Personnel qualification
WARNING!
Risk of injury should qualification be insufficient!
Improper handling can result in considerable injury and damage to equipment.
The activities described in these operating instructions may only be carried out
by skilled personnel who have the qualifications described below.
Keep unqualified personnel away from hazardous areas.
Skilled personnel
Skilled personnel are understood to be personnel who, based on their technical training, knowledge of
measurement and control technology and on their experience and knowledge of country-specific
regulations, current standards and directives, are capable of carrying out the work described and
independently recognizing potential hazards.
Special operating conditions require further appropriate knowledge, e.g. of aggressive media.
2.3 Personal protective equipment
The personal protective equipment is designed to protect the skilled personnel from hazards that could
impair their safety or health during work. When carrying out the various tasks on and with the
instrument, the skilled personnel must wear personal protective equipment.
The required personal protective equipment must be provided by the operating company.
Wear safety goggles!
Protect eyes from liquid splashes.
2.4 Special hazards
DANGER!
Danger of death caused by electric current Upon contact with live parts, there is a direct
danger of death.
Electrical instruments may only be installed and mounted by skilled electrical
personnel.
WARNING!
Residual media in dismounted CPC8000-H may result in a risk to people, the
environment and the system. Take sufficient precautionary measures.
Do not use this precision pressure controller model CPC8000-H in safety or Emergency
Stop devices. Incorrect use of the instrument can result in injury.
Should a failure occur, media under high pressure may be present at the CPC8000-H.
WARNING!
POSSIBLE INJURY! The tubing, valves and other apparatus attached to the instrument
must be adequate for the maximum pressure which will be applied, otherwise physical
injury to the operater or bystanders is possible.
WARNING!
HIGH PRESSURE! High pressure gases are potentially hazardous. Energy stored in
these gases can be released suddenly and with extreme force. High pressure systems
shall be be assembled and operated only by personnel who have been trained in proper
safety practice.
CAUTION
Use the proper pressure medium. Use only clean, dry noncorrosive gases, air or
nitrogen. This instrument is not designed for oxygen use.