Wieland wienet v3, Руководство пользователя

Страница: 33 / 95

Contents of Package
Wieland Electric GmbH | BA001039 (Rev. A) | 08/2016
34
5.4 PPPoE Configuration
To enter the PPPoE configuration select the
PPPoE
menu item. If the
Create PPPoE connection
option is
selected, the router tries to establish PPPoE connection after switching-on. PPPoE (Point-to-Point over
Ethernet) is a network protocol, which PPP frames encapsulating to the Ethernet frames. PPPoE client to
connect devices that support PPPoE bridge or a server (typically ADSL router). After connecting the
router obtains the IP address of the device to which it is connected. All communications from the device
behind the PPPoE server is forwarded to industrial router.
Item Description
Username Username for secure access to PPPoE
Password Password for secure access to PPPoE
Authentication Authentication protocol in GSM network
•
PAP or CHAP – authentication method is chosen by router
•
PAP – it is used PAP authentication method
•
CHAP – it is used CHAP authentication method
MRU Maximum Receiving Unit – It is the identifier of the maximum size of
packet, which is possible to recese in given environment. Default value
is set to 1492 bytes. Other settings may cause incorrect data transmis-
sion.
MTU Maximum Transmission Unit – It is the identifier of the maximum size
of packet, which is possible to transfer in given environment. Default
value is set to 1492 bytes. Other settings may cause incorrect data
transmission.
Note!
If setting bad packet size value (MRU, MTU), the transmission can be unsuccessful.
NOTE