Contents of Package
Wieland Electric GmbH | BA001039 (Rev. A) | 08/2016
30
5.3.4
Data Limit Configuration
Item
Description
Data limit
With this parameter you can set the maximum expected amount of data
transmitted (sent and received) over GPRS in one billing period (month).
Warning Threshold
Parameter Warning Threshold
determine per cent of Data Limit in the
range of 50% to 99%, which if is exceeded, then the router sends SMS
in the form Router has exceeded
(value of Warning Threshold
) of data
limit.
Accounting Start
Parameter sets the day of the month in which the billing cycle starts SIM
card used. Start of the billing period defines the operator, which gives
the SIM card. The router begin to count the transferred data since that
day.
Note!
If parameters Switch to backup SIM card when data limit is exceeded and switch to default
SIM card when data limit isn’t exceeded (see next subsection) or Send SMS when datalimit
is exceeded (see SMS configuration) are not selected, the data limit will not count using the
oldest versions of wieland routers.
5.3.5
Switch Between SIM Cards Configuration
At the bottom of configuration it is possible to set rules for switching between two APN’s on the SIM
card, in the event that one SIM card is inserted or between two SIM cards, in the event that two SIM
cards are inserted.
Item
Description
Default SIM card
This parameter sets default APN or SIM card, from which it will try to
establish the connection to mobile network. If this parameter is set to
none, the router launches in offline mode and it is necessary to estab-
lish connection to mobile network via SMS message.
Backup SIM card
Defines backup APN or SIM card, that the router will switch the defin-
ing one of the following rules.
Default and backup SIM configuration
Note!
If the parameter Backup SIM card is set to none, then the parameters
•
Switch to other SIM card when connection fails
•
Switch to backup SIM card when roaming is detected and switch to default SIM card
when home network is detected
•
Switch to backup SIM card when data limit is exceeded and switch to default SIM card
when data limit isn’t exceeded
switch the router to off-line mode.
Item
Description
Switch to other SIM card
when connection fails
If connection to mobile network fails, then this parameter ensures
switch to secondary SIM card or secondary APN of the SIM card. Fail-
ure of the connection to mobile network can occur in two ways. When
I start the router, when three fails to establish a connection to mobile
network. Or if it is checked Check the connection to mobile network,
and is indicated by the loss of a connection to mobile network.
Switch to backup SIM card
when roaming is detected
and switch to default SIM
card when home network is
detected
In case that the roaming is detected this parameter enables switching
to secondary SIM card or secondary APN of the SIM. If home network
is detected, this parameter enables switching back to default SIM
card.
For proper operation, it is necessary to have enabled roaming on
your SIM card!
NOTE
NOTE
Содержание wienet v3
Страница 12: ...Status 13 Wieland Electric GmbH BA001039 Rev A 08 2016 Mobile WAN status...
Страница 36: ...Contents of Package 37 Wieland Electric GmbH BA001039 Rev A 08 2016...
Страница 48: ...Contents of Package 49 Wieland Electric GmbH BA001039 Rev A 08 2016 OpenVPN tunnel configuration...
Страница 78: ......