Wieland wienet v3, Руководство пользователя

Страница: 86 / 95

Configuration in Typ. Situations
87
Wieland Electric GmbH | BA001039 (Rev. A) | 08/2016
8 Configuration in Typ. Situations
Although wieland routers have wide variety of usage, they are used in these typical situations mostly. In
this chapter, there are four examples of router’s configuration in the typical situations. Examples include
the configuration of all items needed for router to work properly in that situation.
8.1 Access to the Internet from LAN
There is topology of this easy example shown on the figure above. To connect to the Internet via mobile
network the SIM card with the data tarif has to be available from the operator. This basic router’s func-
tion does not need any configuration in this case. It is sufficient to put the SIM card into the SIM1 slot
(Primary SIM card), attach the antenna to the ANT connector and connect the computer (or switch and
computers) to the router’s ETH0 interface (LAN). Wait a moment after turning on the router. It will con-
nect to the mobile network and the Internet signalized by LEDs on the front panel of the router (WAN and
DAT). Additional configuration can be done in the LAN and Mobile WAN items in the Configuration sec-
tion of the web interface.
LAN configuration The factory default IP adress of the eth0 router’s interface is in the form of
192.168.1.1. This can be changed (after login to the router) in the LAN item in the Configuration section,
see figure 82. In this case there is no need of any additional configuration, DHCP server is also enabled
by factory default (so the first connected computer will get the 192.168.1.2 IP address etc.). Other config-
uration possibilities are described in the chapter 4.1.