Kunststoffschweißtechnik
Operating
and
indicating elements
Chapter 4
23.09.2014
Working Instructions WIDOS Miniplast / 2 IR
Page 15 of 43
4.2. Planer
In order to carry out planing put the planer between both workpieces and lock it by turning
the locking tin disc and star grip screw.
Press button to “ON”, the planer discs start turning. Now you may additionally press the
locking button, the planer is running permanently until you deactivate the locking button
again.
In order to carry out infrared welding you must plane the pipes as long as the planer rests
against the limit stop screws on both sides. Thus, the pipes have the prescribed distance to
the heating element during welding.
Especially beware of cutting injuries!
Only activate the planer if it has been put into the machine and secured by
locking tin disc and star grip screw.
The limit stop screws are factory-set. As soon as the limit stop screws are
altered, the radiation distance changes.
Always coordinate the limit stop screws of planer and heating element.
Lug to hinge into upper guiding rod
Star grip screw for attaching the planer
at the guidance bar
Connecting cable
On / off switch
Locking button
Tin disc
Stop screws
