Kunststoffschweißtechnik
WIDOS
Einsteinstr. 5
Phone +49 (0) 71 52 / 99 39 - 0
W. Dommer Söhne GmbH D-71254 Ditzingen-Heimerdingen
Fax
+49 (0) 71 52 / 99 39 - 40
E-mail: [email protected]
Website www.widos.de
23.09.2014
Working Instructions WIDOS Miniplast / 2 IR
Page 6 of 43
1. Product description
1.1. Application and intended use
The
WIDOS Miniplast / 2 IR
The WIDOS
Miniplast/2 IR
is made for infrared-butt welding of
pipes and fittings out of PP and PVDF with a diameter range of Ø = 20 – 110 (Standard
diameters: 20 / 25 / 32 / 40 / 50 / 63 mm).
The machine is kept small so that it can easily be used in the pipe system.
Any other use of this machine is non-intended.
The machine is only to be used in a technically perfect condition as well as intended, safety-
and danger-conscious in compliance with the working instructions and the relevant safety
regulations (especially the regulations for the prevention of accidents).
All use going beyond is not prescribed.
The manufacturer is not responsible for damages caused by misuse.
The risk is held only by the user.
Also part of the purpose oriented use is
the respect of all the indications of the working instructions and
performing the inspection and maintenance works.
1.2. Overview
1.3. Safety
measures
In case of wrong use, wrong operation or wrong maintenance, the machine itself or products
standing nearby can be damaged or destroyed.
Persons in the endangered area may be injured.
Therefore these working instructions have to be thoroughly read and the corresponding safety
regulations must necessarily be observed.
planer, electrical
Protective box
Heating element
Basic machine
Control unit heating
element
Foot/table support
