widos 6113 mobile, Перевод инструкций по эксплуатации

Страница: 35 / 72

WIDOS Einsteinstr. 5 Phone ++49 7152 9939 0
Wilhelm Dommer Söhne D-71254 Ditzingen-Heimerdingen Fax ++49 7152 9939 40
GmbH website: http://www.widos.de email: info@widos.de
12.05.15 Working Instructions WIDOS 6113 Page 31 of 67
7. Maintenance and repair
Goal of the chapter is:

Keeping the nominal state and the operation capacity of the machine.

Increasing the efficiency by avoiding non-planned outage.

Efficient planning of the maintenance work and the maintenance tools.
7.1. Maintenance and inspection, repair
All maintenance and repair work have to be basically performed with the machine in off
position.
During this the machine has to be secured against unauthorized switching on.
Prescribed maintenance and inspection work should be performed in time.
The DVS gives the advice of inspection work after 1 year.
For machines with a specially high usage percentage the testing cycle should be shortened.
The work should be performed at the WIDOS GmbH company or by an authorized partner.
7.2. How to check the hydraulic oil level

Prior to each starting of the machine check oil level of the hydraulic unit in order to avoid damages.
Only the closed hydraulic aggregate (optional): Remove the cover of the hydraulic aggregate.

Remove the red cover with integrated oil dip stick from the rear of the hydraulic unit.

Detach the cap (with integrated oil dipstick) of the filler neck of the hydraulic tank.

Clean the oil dipstick with a dry tissue and insert it again in the tank by screwing.

Remove the oil dipstick again and check the oil level.

The oil level must be between the two marks. Please use the hydraulic oil of the quality HLPD 32.

If the oil level is under the lower mark, then hydraulic oil of the quality HLDP 32 must be added.

The oil level may not be above the upper mark since otherwise there is the danger of spilling in certain
situations.

Having completed all work shut the cap again tightly.

Do not tilt the hydraulic unit since the cap of the tank is not 100% sealed and oil may leak.