widos 6113 mobile, Перевод инструкций по эксплуатации

Страница: 16 / 72

WIDOS Einsteinstr. 5 Phone ++49 7152 9939 0
Wilhelm Dommer Söhne D-71254 Ditzingen-Heimerdingen Fax ++49 7152 9939 40
GmbH website: http://www.widos.de email: info@widos.de
12.05.15 Working Instructions WIDOS 6113 Page 16 of 67
4. Operating and indicating elements
4.1. Elements on open aggregate (optional)
No. Name Function
1 Push-button - By pressing the push-button the motor switches over to high
speed
2 Valve lever Opening the slides. There are 4 different positions:
- forwards: slides close.
- in the middle (usual position): the pressure which is currently
achieved is kept (also by means of the built-in hydraulic
accumulator)
- Pressure release: (depressurized position):
a possibly existing pressure is released without moving the
slides. Due to the hydraulic accumulator, it takes about 10 s
until the pressure is completely released.
- backwards: slides open
3 Setting screw for pressure
relief valve - Limitation of the pressure to the desired value.
4 Hydraulic connections for
opening / closing the slides
- Non-dropping quick-acting couplings
5 Connecting cable with plug
CEE-32 A - connection to power supply
6 Pressure gauge Display of the hydraulic pressure
7 Screw with oil dipstick - to determine the oil level
- oil filler neck
You may run the machine quickly in order to drive the slides back and forth as well as for the
change-over by:

Pressing <button> (Nr. 1) and <control lever> on „FORWARDS“ or „BACKWARDS“.
In order to carry out planing and for the joining you must select the slow speed:

With <control lever> on „FORWARDS“ or „BACKWARDS“ without pressing <button>.
1
2
3
4
5
6
7