widos 6113 mobile, Перевод инструкций по эксплуатации

Страница: 22 / 72

Starting and Operating Chapter 5
12.05.15 Working Instructions WIDOS 6113 Page 22 of 67
5.2. Connection of hydraulic aggregate to basic machine

Put the hydraulic hoses of the basic machine into the quick-action couplings of the hydraulic aggregate in
order to weld (chapter: 4.1no: 10).
With open hydraulic aggregate:

Connect the mains plug of the planer to local socket, (CEE-16A / 400 V / 50 Hz, right-hand rotary field).

Connect the mains plug of the heating element to local socket, (CEE-16A / 400 V / 50 Hz).

Connect the mains plug of hydraulic aggregate to local socket, (CEE-32A / 400 V / 50 Hz Connect the mains
plug of the planer to local socket, (CEE 16A / 400 V / 50 Hz, right-hand rotary field).
With enclosed hydraulic aggregate:

Connect the mains plug of the planer to the hydraulic aggregate, (CEE-16A / 400 V / 50 Hz).

Connect the mains plug of the heating element to the hydraulic aggregate, (CEE-16A / 400 V / 50 Hz).

Connect the mains plug of the enclosed hydraulic aggregate to the local power supply (CEE-32A / 400 V /
50 Hz, right-hand rotary field)
Lay hydraulic and electric wires carefully (danger of stumbling).
Verify whether the hydraulic pump is connected clockwise!
5.3. How to mount the lifting device (optional)

Detach the suspension bracket on the crane motor, put and fix the bracket to the lifting device with the
bolts and SL clips.

Put the lifting device through the upper holder from above and downwards to the lower support.
Suspension bracket
Holder above
Support below