widos 6113 mobile, Перевод инструкций по эксплуатации

Страница: 30 / 72

Foundation: 2207, 2208 DIN 16932 German association for welding
Use for:
6100 / 6100 mobile / 6200 / 6111 / 6113 / 6113 mobile
1 bar on manometer: 173 N
PE 80 The value for heating element temperature is between 200° C - 220° C / 392 °F - 428 °F.
The smaller the pipe wall the higher the temperature.
PE 100 The standard value for heating element temperature is 220 °C / 428 °F.
Increase the change-over time and the welding pressure time at PE 100 as fast as possible !
time to
change- reach full
over welding cool-down time
0,15 (PE) time pressure
pressure in
T
desired
temperature
time
pipe pipe SDR bead-up circular heat-up max. time welding cool-
diameter wall pressure bead time change- to reach pressure down
OD (s) [bar] min. [s] over welding [bar] time
[mm] [mm] [mm] time pressure [min]
[s] [s]

bead-up heat-up
welding area
in welding area
Table for PE
Additional to the given bead-up force and to the welding force the moving force of the support must be added !
P (N/mm²)
400 9,8 41 11 1,5 98 7 7 11 13
400 12,3 33 13 2,0 123 8 8 13 16
400 15,3 26 17 2,0 153 9 9 17 20
400 19,1 21,0 20 2,5 191 10 11 20 24
400 22,7 17,6 24 2,5 227 11 13 24 28
400 23,7 17 25 2,5 237 11 13 25 29
400 29,4 13,6 30 3,0 294 13 16 30 36
400 36,3 11 36 3,0 363 16 19 36 44
400 44,7 9 44 3,5 447 18 23 44 54
400 54,7 7,4 52 4,0 547 21
27
52 65
450 11,0 41 14 1,5 110 8 8 14 15
450 13,8 33 17 2,0 138 9 9 17 18
450 17,2 26 21 2,0 172 9 10 21 22
450 21,5 21,0 26 2,5 215 11 12 26 27
450 25,5 17,6 30 2,5 255 12 14 30 31
450 26,7 17 31 3,0 267 12 14 31 33
450 33,1 13,6 38 3,0 331 15 17 38 40
450 40,9 11 46 3,5 409 17 21 46 49
450 50,3 9 55 4,0 503 20 25 55 60
450 61,5 7,4 66 4,0 615 23
31
66 71
12.05.2015 Working Instructions WIDOS 6100 - 6200 Page 29 / 2 of 67