widos 6113 mobile, Перевод инструкций по эксплуатации

Страница: 23 / 72

Starting and Operating Chapter 5
12.05.15 Working Instructions WIDOS 6113 Page 23 of 67
5.4. How to replace the reduction inserts
Pipes with OD 630 have to be clamped in the basic clamping devices.

Pipes with OD 315 - 560 mm will need reducer inserts.

Unscrew the mounted reduction inserts by means of the provided Allan key.

Screw the reduction inserts with the corresponding diameter into the clamping devices.
5.5. Remove clamping ring with support

If necessary (e.g. T-pieces) you may detach the outer fix clamping element.
Detach the four hexagon socket screws for the spacer and detach the 3 x 2 fixing screws of the front
support.
Important, do not unscrew the hexagon socket screws!
The hexagon socket screws hold a pressure piece in place within the square pipe by which
both basic frames are fixed.
Spacer
Support
Hexagon-head screws
Base frame