widos 6113 mobile, Перевод инструкций по эксплуатации

Страница: 37 / 72

Maintenance and repair Chapter 7
12.05.15 Working Instructions WIDOS 6113 Page 33 of 67

When the venting process at the lower vent screws is completed, repeat the process at the upper „vent
screw (Z2) for closing“(left-hand side), as well as at the upper „vent screw (A2) for opening“(right-hand
side).
The lower vent screws always have to be vented at first because there is a direct connection
between the upper and the lower cylinders.

If air remains in the lower cylinder, it will ascend in the upper cylinder when pressure is
applied.

Make sure, there must always be enough oil in the tank.
7.5. Planer

Check the stress of the drive chain in the planer and grease it regularly. The cover of the planer can be
screwed off by means of the provided socket spanner.

Do not lay the planer on its blades.

Check the blades of the planer for sharpness, turn them if necessary (grinded on both sides, max.
thickness of the shavings: 0, 2 mm!).
7.6. Storage

The cylindrical waves of the basic machine are to be kept free from dirtiness and need to be covered with
a thin oil film if they are not being used.

Store dry.
7.7. Clamping elements

For a long service life clean and grease regularly the threaded spindles and the joint parts which are
used for clamping the pipes.
7.8. Lifting device (optional)
Check the lifting device according to the inspection and service plan of ABUS Co. (working instructions is
included).
7.9. Disposal
At the end of the life time, the machine has to be disposed of properly, non-polluting and
in accordance with the national laws of waste disposal.