Kunststoffschweißtechnik
Description of Product
Chapter 1
19.09.11
Working Instructions WIDOS 5500 CNC 3.0
Page 9 of 78
1.6. Designation of the product
The product is designated by type labels.
The type labels are attached at the control unit, at the heating element, at the planer and at
the basic machine.
They contain the type, the serial number and the year of construction of the machine.
1.6.1.
Technical data
All important technical data of each single component are listed.
This allows a quick information about working capacity and structure.
1.6.1.1.
WIDOS CNC 3.0 General data
Weight (without transport box):
Dimensions (l x w x h):
40.5 kg
appr. 630x430x510 (mm)
Power:
560 Watt
Voltage:
400 V (
±
10%)
Current:
4,7 A
Frequency:
50 Hz
Phase shift:
appr. 18°
Control voltage:
5 V
Insulation system:
IP 44
Hydraulic oil tank:
appr. 1 l
Attached elements:
Connection cable with motor protective plug 16 A
Power of emergency set:
6.5 kVA / 400 V/3~
Electro motor and pump:
Driving speed (t/min):
2720
Max. working pressure of the pump:
110 bar
Working pressure:
100 bar
Volume flow:
3,5 l/min.
Emissions
- The sound intensity level while using the
planer can be higer than 85 dB (A).
- When using the named pipe materials and
when welding below 260 °C / 500 °F no
toxicant damp arises.
Environmental conditions at the
welding area:
- Keep the workshop clean (no dust at the
welding area)
- If secured by an appropriate measurement
that allowed conditions for welding are
indicated, it is possible to work in any
outside temperature condition as far as the
welder is not constrained in its manual skill.
- Avoid humidity, if necessary use a welding
tent
- Avoid strong sun rays influence
- Protect from wind, shut the pipe ends.
