Kunststoffschweißtechnik
Starting and Operating
Chapter 5
19.09.11
Working Instructions WIDOS 5500 CNC 3.0
Page 25 of 78
5.6. Description of the Display
No.
Buttons
Function
1
EMERGENCY-OFF
push button
The EMERGENCY-OFF push button snaps when it is
operated, the machine stops (see also chapter 4.2).
2
Display
Shows the actual parameters and status messages (for
welding and programming).
Several values can be displayed simultaneously.
3
Start
Start the welding functions.
Confirm the new set parameters.
4
Planer
Start the planing process (on/off switch on the planer must be
switched on).
5
+ / -
Change the parameters.
6
Enter
Enter / quit the menu "parameter setting".
Confirm the parameters.
7
C
Abort the welding process
Step back at "parameter setting".
5.7. Accessories for Reading the Data in and out
5.7.1.
Legitimacy Cards
There are 4 different types of cards which are accepted by the barcode reader:
(1) With each supplied machine a
general legitimacy card
(5 pieces) is basically supplied
with. It is of white colour and gives the legitimation to operate all functions (including
special functions).
(2)
Pipe data card
: on this card all parameters of a pipe are memorized (parameters are
stored in the control unit). For ordering the card, the pipe diameter, the pipe-wall
thickness and the material should be specified.
(3) Optionally, a
gas legitimacy card
(yellow) can be supplied. With this card, no changes
can be made in the system. The computer will ask automatically for a pipe data card for
setting the pipe data.
(4) Optionally, a
ISO-legitimacy card
can be supplied. It is of white colour and gives the
legitimation to operate all functions (including special functions).
•
Protect the cards from wetness and dirtiness.
1
2
5
3
4
6
7
