Kunststoffschweißtechnik
WIDOS
Einsteinstr. 5
Phone +49 (0) 71 52 99 39 - 0
W. Dommer Söhne GmbH D-71254 Ditzingen-Heimerdingen
Fax
+49 (0) 71 52 99 39 - 40
Website: http://www.widos.de
Email: [email protected]
19.09.11
Working Instructions WIDOS 5500 CNC 3.0
Page 7 of 78
1. Description of the product
1.1. Usage and purpose-oriented use
The
WIDOS 5500 CNC 3.0
has been designed only for heating element butt welding of pipes
and fittings made out of PE, PP, PVDF with their diameter range going from OD
min
= 200 mm
up to OD
max
= 500 mm
(standard diameters: 200 / 225 / 250 / 280 / 315 / 355 / 400 / 450 / 500 mm.)
All use of this control going beyond is not purpose oriented.
The machine is only to be used in a technically perfect condition, as well as purpose oriented,
safety- and danger-conscious in compliance with the working instructions and the relevant
safety regulations (especially the regulations for the prevention of accidents).
The described plastic welding machine may only be operated, maintained and repaired by
persons who are trained and informed about the dangers.
The manufacturer is not responsible for any damages caused by inexpert handling or
operation.
For personal injuries, material and immaterial damages resulting herefrom, only the user is
responsible!
The control unit is reliable in the use when it is used according to the prescriptions in
connection with a welding machine designed by WIDOS.
Also part of the purpose oriented use is
•
respecting all the indications of the working instructions and
•
performing the inspection and maintenance works.
1.2. Safety measures
In case of wrong use, wrong operation or wrong maintenance, the machine itself or products
standing nearby can be damaged or destroyed.
Persons being in the endangered area may be injured.
Therefore these working instructions have to be thoroughly read and the corresponding safety
regulations must be necessarily adhered to.
1.3. Conformity
The machine corresponds in its construction to the valid recommendations of the European
Community as well as to the according European standard specifications.
The development, manufacturing and mounting of the machine were made very carefully.
