Kunststoffschweißtechnik
Starting and Operating
Chapter 5
19.09.11
Working Instructions WIDOS 5500 CNC 3.0
Page 35 of 78
5.11.1. Welding process with traceability
Display:
2
nd
line:
WIDOS 5500 CNC
22.11.2002 10:10
The type of the machine is displayed
Identify with welder's identification code
next menu by pressing <Start> button
Display:
2. line:
please read pipe
code (1st pipe)
Read with bar code reader from 1st pipe
Display:
2. line:
Traceability 1:
RB PE80 160 9.1
The pipe data is displayed
After e few seconds, the display changes
Display:
2
nd
line:
please read addit.
pipe code (2nd pipe)
Read with barcode reader
Read with bar code reader from 2nd pipe
Display:
2. line:
Traceability 2:
RB PE80 160 9.1
The pipe data is displayed
in case of different pipe data, an error message appears:
Display:
2. line:
error: not possible
to weld those pipes
Confirm the error message by pressing button <Enter>
If the length of pipe is entered additional, disapears:
Display:
2. line:
length of 1. pipe
+000.00 mm
Enter the length of the last (read in) barcode pipe 1 up to the joint by
buttons <+ / - / Enter>
Press button <Start>
