Kunststoffschweißtechnik
Safety Rules
Chapter 2
19.09.11
Working Instructions WIDOS 5500 CNC 3.0
Page 15 of 78
•
If necessary wear a hair-net.
•
Always put the planer back into the reception box after and before each use.
•
Only transport the planer at the handle. Do not touch the surfaces.
2.8.3.
Danger of being burnt by heating element and welding area
You can burn parts of your body and inflammable materials can also be ignited!
The heating element is heated up to more than
200°C
!
•
Do not touch the surfaces of the heating element.
•
Do not leave the heating element unsupervised.
•
Take enough safety distance to inflammable materials.
•
Do wear safety gloves.
•
Always put the heating element back into the reception box after and before each use.
•
Only transport the heating element at the handle.
2.8.4.
Danger of Squeezing by clamping devices and guideways
There is a danger of serious injuries: on the one hand between the inner
clamping devices and on the other hand between the outer clamping device
and the end of the guideway
•
Do not stand or put hands between clamped pipe ends.
•
Do not stand or put hands between the inner clamping tools with not yet clamped pipes.
•
Do not block opening and closing of the machine sledge.
2.8.5. Risk of injury by noises
Noises exceeding 80 dB (A) may occur; during planing it is obligatory to wear ear
protection!
2.9. Structural modifications on the machine
•
No modifications, extensions or reconstructions may be made on the machine without
permission of the manufacturer. In cases of non-compliance, any guarantee and liability
demands shall expire.
•
Machine parts which are not in a perfect condition are to be replaced immediately.
•
Only use original
WIDOS
spare and wear parts.
•
In case of purchase orders please always state the machine and version number!
