030-300408 Rev. B
94
August 2005
VersaLink™ Gateway (Model 327W)
User Guide
NOTE: Whenever the PPP Status displays
DOWN,
you do not have a PPP session established. If your Gateway’s
connection setting is set to “Always On,” after a brief delay the PPP session will be established automatically and
the PPP Status will display
UP.
If the connection setting is set to “Manual,” you must click on the
Connect
button
to establish a PPP session. Once the PPP session has been established (PPP Status displays
UP
), you may proceed
with your Gateway’s configuration.
13.5.7 VLAN
The following settings will be displayed if you select
VLAN
from the
Advanced LAN
menu.
VLAN Enable
Factory Default = DISABLED
If this box is check, VLAN will be Enabled. This will allow VLAN
tagging to occur according to the data port’s configuration.
LAN Port
This allows you to select the LAN port that you wish to configure.
Possible responses are:
Ethernet Port 1
Ethernet Port 2
Ethernet Port 3
Ethernet Port 4
WLAN Port
VLAN ID
This allows you to assign a VLAN ID to the port.
Possible responses are:
1 through 8
VLAN Priority
This allows you to set the VLAN priority for the port.
Possible responses are:
0 through 7
Outgoing VLAN Tag
This allows you to keep or remove the VLAN tag on the port when
data is outgoing.
