030-300408 Rev. B
89
August 2005
VersaLink™ Gateway (Model 327W)
User Guide
If this box is CHECKED, it enables the addresses from the Private
LAN to use the NAT interface.
Modem IP Address
Displays VersaLink’s IP address
Subnet Mask
Displays the Subnet Mask, which determines what portion of an IP
address is controlled by the network and which portion is controlled
by the host.
DHCP Start Address
Displays the first IP address that the DHCP server will provide.
DHCP End Address
Displays the last IP address that the DHCP server will provide.
DHCP Lease Time
Displays the amount of time the provided addresses will be valid,
after which the DHCP client will usually re-submit a request.
NOTE: DHCP Lease Time is displayed in the following format: (dd:hh:mm:ss)* This value must be greater than 10
seconds. The default = 01:00:00:00. Seconds must be between 0 and 59, minutes must be between 0 and 59, and
hours must be between 0 and 23.
*(dd = days, hh = hours, mm = minutes, ss = seconds).
If the settings you have entered in the
Private LAN Configuration
screen are incorrect, the following warnings
messages may be displayed via pop-up screens. If this occurs, check the settings in the
Private LAN Configuration
screen.
Warning Message
Check Private LAN DHCP Settings
Start Address is not part of the Subnet
Check the value in the DHCP Start Address field
End Address is not part of the Subnet
Check the value in the DHCP End Address field
End Address is below the Start Address
Check the value in the DHCP End Address field
Lease time must be greater than 10 seconds
Check the values in the DHCP Lease Time fields
Seconds must be between 0 and 59
Check the
Seconds
value in the DHCP Lease Time field
Minutes must be between 0 and 59
Check the
Minutes
value in the DHCP Lease Time field
Hours must be between 0 and 23
Check the
Hours
value in the DHCP Lease Time field
13.5.6 Public LAN Configuration – Multiple IP Address PassThrough
The following screen will be displayed if you select
Public LAN
from the
Advanced LAN
menu. Click in the
Public LAN DHCP Server Enable
box. A check mark will appear in the box.
NOTE: The Public LAN feature, if available from your service provider, allows VersaLink to use LAN IP addresses
that are accessible from the WAN. Public LAN allows your computer to have global address ability. To utilize the
Public LAN feature on VersaLink, your ISP must support Public LAN and Static IP. Contact your ISP for details.
