030-300408 Rev. B
129
August 2005
VersaLink™ Gateway (Model 327W)
User Guide
Service Name
The NAT service for which you are configuring Port Forwarding.
Type
The type of NAT service configuration you selected.
Protocol
The type of Protocol that is used to run this NAT service.
TCP- Transmission Control Protocol.
UDP-User Datagram Protocol (UDP).
Local IP Address
If a static IP address has been assigned, it will be displayed here.
Base Host Port
The port on the WAN that will host the NAT service selected. Base Host Port is the
first port that will be used for a specific service when configured for a range of ports.
14.3 Port Forwarding Trigger Ports
To select
Port Forwarding
Trigger Ports
, click on
define custom service
from the
Service Configuration
screen,
and then select
Trigger Ports
from the
Custom Service
screen. Click on
next
. The follow settings will be displayed
in the
Trigger Ports
screen. Enter your values in the
Local ‘Trigger’ Port Range
fields and click on
next
to
continue.
Service Name
The NAT service you selected.
Local Trigger Port Range
The local LAN side TCP/UDP port.
Global Port Range
The WAN side TCP/UDP port range.
