030-300408 Rev. B
60
August 2005
VersaLink™ Gateway (Model 327W)
User Guide
13.2.1 Configuring UPNP on the VersaLink
To enable UPNP on the Gateway perform the following steps:
1) Select
Service Configuration
from the Configuration screen
2) Click
the
UPNP Enable
box (a check mark will appear in the box).
3) Follow the instructions in the pop-up screens.
4) Click
OK
to Reset the Gateway.
NOTE: When you are ready to disable UPNP, uncheck the
UPNP Enable
box in the
Service Configuration
screen.
If you click the
UPNP Enable
box in the
Service Configuration
screen, a check mark will appear in the box and
the following pop-up screen will be displayed. Click on
OK.
If you clicked
OK
in the preceding screen, the following pop-up screen will be displayed. Click on
OK
to reset the
Gateway.
Note: To use the UPNP functionality in Versalink, your Windows XP operating system must also support UPNP.
Please contact your computer manufacturer to verify that UPNP is enabled in your Windows XP operating system.
