030-300408 Rev. B
131
August 2005
VersaLink™ Gateway (Model 327W)
User Guide
14.5 Static NAT
If you select
Services
from the
Configuration
menu, the following screen will be displayed, showing the static
NAT button. Static NAT allows you to configure VersaLink to work with the special NAT services.
NOTE: When the Gateway is configured for Static NAT, any unsolicited packets arriving at the WAN would be
forwarded to this device. This feature is used in cases where the user wants to host a server for a specific application.
STOP:
Single Static IP must be disabled (if it has been enabled previously) before you enable
static NAT
. To
disable Single Static IP, select
Single Static IP
from the
Configuration
menu. Next, click on the
disable
button,
and then click on
OK
in the pop-up screens to allow the Gateway to be reset. As explained in section 13.1 (Single
Static IP), you must reboot your computer after you enable or disable Single Static IP. After you have rebooted your
computer, return to static NAT configuration screen by selecting
Services
from the
Configuration
menu and
clicking on the
static NAT
button.
