030-300408 Rev. B
72
August 2005
VersaLink™ Gateway (Model 327W)
User Guide
If you want to save your new firewall settings, click
save
in the screen labeled
User Define Firewall Rules
.
NOTE
: Westell recommends that you do not change the settings in the
User Defined Firewall Rules
screen. If you
need to reset VersaLink to factory default settings, push the reset button on the rear of VersaLink.
If you clicked
save
in the
User Define Firewall Rules screen, the following pop-up screen will be displayed. Click
OK
when asked
Do you wish to save these Rules to Flash and switch you Security Level to “User”?
This will
save your new firewall settings. If you click
Cancel,
your new firewall settings will not be saved.
Note: The information displayed in this screen
depends on the level of security you have selected.
