WERKU WK401630, Оригинальное руководство пользователя

Страница: 3 / 40

3
English
ENG
DO NOT ABUSE THE CORD.
►
Never use the cord to carry, lift or unplug the
power tool
►
Keep the cord away from heat,
oil, sharp edges or moving parts
►
Damaged or
entangled cords increase the risk of electric shock
►
When operating a power tool outdoors, use an
extension cord suitable for outdoor use
►
The
use of an extension cord suitable for outdoor use
reduces the risk of electric shock
►
If the use of a
power tool in a damp location is unavoidable, use
a power protected by a residual current device
(RCD)
►
The use of an RCD reduces the risk of
electric shock.
AVOID ACCIDENTAL STARTING.
►
Make sure the switch is in “off” position before
connecting to the network, or when taking or
carrying the power tool
►
Carrying power tools
with your finger on the switch or plugging in
power tools that have the switch in “on” position
invites to accidents
►
Remove keys or tools
before starting the power tool
►
A left key or tool
attached to a rotating part of a power tool can
cause personal injury.
USE AND CARE OF POWER TOOLS.
►
Do not force the power tool
►
Use the correct
power tool for your application
►
The correct
power tool will do the job better and safer at the
rate for which it was conceived
►
Do not use the
power tool if the switch cannot be positioned
to “off” and “on” position
►
Any power tool that
cannot be controlled with the switch is dangerous
and must be repaired
►
Remove the plug from
the power supply and/or battery before making
any adjustments, changing accessories or
storing the power tool
►
Such preventive safety
measures reduce the risk of starting the power
tool accidentally.
STORE POWER TOOLS.
►
Store power tools out of reach of children and
do not allow the handling of power tools to people
unfamiliar with the tools or these instructions
►
Power tools are dangerous in the hands of
untrained users.
MAINTENANCE.
►
Check moving parts for misalignment or binding,
there are no broken parts or other conditions
that may affect the operation of power tools
►
Power tools are repaired before use when
they are damaged
►
Many accidents are caused
by poorly maintained power tools
►
Use power
tools, accessories and tool tips, etc. according
to these instructions and in the manner provided
for the particular type of power tool, taking into
account the conditions work and work to develop
►
The use of the power tool for applications other
than those intended could result in a dangerous
situation
►
Please check your power tool serviced
by a Werku
®
official repair service using only
identical replacement parts
►
This will ensure the
safety of the power tool is maintained.
CHECK THE GOOD CONDITION OF THE
CORDLESS DEMOLITION HAMMER DRILL.
►
Make sure that all the screws in the cordless
demolition hammer drill are perfectly tightened
►
In cold climates or when the cordless demolition
hammer drill has not been used for a period, allow
the cordless demolition hammer drill to warm up
by leaving it to run empty for a few minutes, to
ensure that all internal components are perfectly
lubricated
►
Make sure that the possible installed
accessories are perfectly fitted in place.
BEFORE STARTING WORK.
►
Make sure that the cordless demolition hammer
drill is firmly supported before using
►
Check that
no one is standing beneath you when using the
cordless demolition hammer drill in high areas
►
Keep your hands away from all moving parts of
the cordless demolition hammer drill.
DURING THE OPERATION.
►
Do not leave the cordless demolition hammer drill
operating without having it firmly fixed
►
Only turn
it on when you are sure you have full control over it
►
Do not point the cordless demolition hammer drill at
anyone while in use
►
When operating the cordless
demolition hammer drill will produce vibrations
►
The
screws may gradually come loose, and possibly
cause faults or accidents
►
Keep your hands away
from all moving parts of the cordless demolition
hammer drill.
AT FINISH WORKING.
►
Do not touch the possible accessories installed
in the cordless demolition hammer drill after use
►
It may be hot and cause burns
►
Some materials
worked with may contain chemicals or toxic