Welch Allyn RetinaVue 700, Инструкция по применению

Страница: 117 / 158

Note Use the radio buttons to select the 24-hour or 12-hour
format.
4. Touch (up) or (down) to adjust the day, month, and year in the DD/
MM/YY format.
5. Touch (Back) to return to the Settings screen .
Set the Device access code at the RetinaVue 700
Imager (USB only)
Note Setting the Device access code before first use
provides additional security features in the
RetinaVue 700 Imager to prevent unintended
access to patient information by unauthorized
individuals.
Note
See First time selection of Wi-Fi connectivity
workflow for instructions on setting the Device
access code on the RetinaVue 700 Imager from
the RetinaVue Network Customer Portal.
1. If not already powered on, press and hold the power button to turn the
RetinaVue 700 Imager on.
2. From the main Patients screen, touch
(Navigation menu)
.
3. Touch Settings .
4. Touch
Advanced settings
.
5. Touch Device access code to enter an access code for the RetinaVue 700
Imager.
6. Use the touchscreen numeric keypad to enter an access code into the Access
code field and then retype the same code into Access code (retype) field.
Note The access code password can contain a minimum of 1-
digit and a maximum of 18-digits. Characters are only
numeric from 0 through 9.
7. Touch OK to accept the code and touch OK again at the confirmation screen
to return to the Advanced settings screen.
8. Touch (Back) to return to the Patients screen .
Directions for use Controls 113