Page 24
990008 Rev. H
6. Sterilization Procedures
WARNING: All Kreativ Mach 5.0 and Mach 5.0 PLUS accessories which
come into contact with the patient should be sterilized prior to each use. The
handpiece cradle should be wiped with disinfectant prior to each patient use.
Handpiece
Sterilization of the cutting handpiece and nozzles can be accomplished by using any
conventional dental autoclave. The handpiece and nozzles are fully autoclaveable in a
dry heat, steam, or chemical autoclave. This is recommended prior to each use to
ensure that the handpiece and nozzles do not become a source for cross contamination
of disease or infection.
Prior to sterilizing, the SuperSonic Turbo
™
(SST) Handpiece Assembly should be
cleared of all residual powder by blowing clean, dry air through the handpiece.
Handpiece Cradle
Always wipe down the handpiece cradle in the remote control unit before each patient
use to avoid contamination of the handpiece from an earlier patient session.
WARNING! Do not
attempt to disassemble the SST Handpiece Assembly.
Accessories
The handpiece/nozzle hose assembly of the Kreativ Mach 5.0 and Mach 5.0 PLUS
should be sheathed or wiped down in accordance with standard dental procedures.
Chapter
6
Содержание Kreativ Mach 5.0
Страница 13: ...Page 13 990008 Rev H Drawings of Controls Figure 1...
Страница 14: ...Page 14 990008 Rev H Figure 2...
Страница 16: ...Page 16 990008 Rev H...
Страница 35: ...Page 35 990008 Rev H THERE ARE NO HAZARDOUS MATERIALS PRESENT...
