Page 17
990008 Rev. H
4. Unpacking and Setup
General Information
SAVE THE CARTON!
The Mach 5.0 and Mach 5.0 PLUS and all accessories are shipped in a single
container. When unpacking, check items against the packing list included with the unit.
The shipping container and packing materials should be retained in the
unlikely event that the instrument has to be returned to the factory for service
or repair.
To operate the Mach 5.0, the unit requires an external source of either clean, dry,
compressed air, or nitrogen together with a properly adjusted pressure regulator. For
additional information consult your Kreativ, Inc. dealer.
The Mach 5.0 PLUS
instrument has a built-in air compressor, thus eliminating the need
for connection to an external air supply.
It is necessary to connect to a properly grounded electrical outlet.
Unpacking and Setup
Remove the Mach 5.0 or the Mach 5.0 PLUS
unit from the shipping container and
proceed as follows:
•
Unlock and open the left side door gently.
•
Remove the foam packing (2 pieces) which prevents the vibrator from moving
during shipping. Retain the foam with the shipping box and packing materials. If the
unit is to be shipped again, the vibrator support foam packing should be reinstalled
to prevent possible damage to the vibrator and its mounts.
CAUTION: Failure to remove the foam packing will result in improper vibrator
operation and powder flow.
Chapter
4
Содержание Kreativ Mach 5.0
Страница 13: ...Page 13 990008 Rev H Drawings of Controls Figure 1...
Страница 14: ...Page 14 990008 Rev H Figure 2...
Страница 16: ...Page 16 990008 Rev H...
Страница 35: ...Page 35 990008 Rev H THERE ARE NO HAZARDOUS MATERIALS PRESENT...
