Weir SPM Flow Line, Руководство по установке

Страница: 7 / 42

7
CHEMICAL COMPATIBILITY CHART
Chemical FSRs
Acids *See note
Alcohols OK
Strong Alkalis OK
Ethers OK
Hydro-Carbons OK
Ketones OK
Oils – Crude OK
Oils – Lubricating OK
Soaps / Seawater OK
Water / Seawater OK
Weak Alkalis OK
*Acid Compatibility – Hydrochloric Acid (HCl): Concentrations
up to 36% acceptable for up to 8 hours. Hydrofluoric Acid (HF):
Concentrations up to 10% acceptable for up to 8 hours. (Note that
all chemical exposures are assumed to be at ambient temperature.)
For other acids or chemicals not stated, please contact Weir Oil &
Gas Engineering at 1-800-342-7458.
DEFINITIONS
Anchor Line
– Anchor lines are similar to main lines; however,
instead of being continuously installed along the flow line like main
lines, anchor lines are attached to a single point on the flow line,
such as an anchor crossover, and run to a properly rated object
away from the flow line. (Refer to Securing SPM
®
FSR System
Ends later in this document) Only appropriately rated Spines
should ever be used to make up anchor lines. Reference the
previous product rating color code chart for more information.