Weir SPM Flow Line, Руководство по установке

Страница: 26 / 42

26
ANCHOR CROSSOVER ASSEMBLY
• DO NOT use “C” type shackles in Anchor Crossover assemblies
• Use “C” type of shackle only to link SPM
®
FSR spines or tie off
at anchor point (See page 30)
• Only “bolt” type shackles should be used
NOTE: There are two types of approved shackles used on a typical
SPM
®
FSR installation. Never substitute the incorrect type of
shackle for the non-specified application. Individual shackles or
shackles on achor crossovers are used to tie spine to the shackle
and not used to go through the eye or loop of the shackle. See
SHACKLE DETAIL ABOVE for complete details.
“C”-Type Shackle
Anchor Clamp
Half
(1 of 2 required)
“D”-Type
Shackle
(1 of 2 Required)
“D”-Type
Shackle
(1 of 2 Required)
“D”-Type Shackle
For Anchor Crossovers
Wing nut retainer
segments &
retainer ring
Seal Ring
Anchor Clamp
Half
(1 of 2 required)