Weir SPM Flow Line, Руководство по установке

Страница: 3 / 42

3
WARNING !
FAILURE TO READ, UNDERSTAND AND FOLLOW THIS
INSTRUCTION GUIDE MAY RESULT IN SEVERE PERSONAL
INJURY OR DEATH.
THE USE OF PRESSURIZED COMPONENTS IN OIL FIELD
OPERATIONS IS INHERENTLY DANGEROUS. PERSONNEL
WORKING AROUND ENERGIZED EQUIPMENT AND FLOW
LINES SHOULD USE EXTREME CARE AND OBSERVE ALL
APPLICABLE SAFETY PRECAUTIONS.
PROPER USE OF THIS DEVICE CAN REDUCE BUT NOT
ELIMINATE THE RISK OF SEVERE PERSONAL INJURY OR
DEATH. EVEN WITH SPM
®
FSRs, SEVERE PERSONAL INJURY
OR DEATH CAN RESULT FROM DEBRIS AND SHRAPNEL
SHOULD A RUPTURE OCCUR.
THIS IS NOT A LIFTING DEVICE, NOR SHOULD IT BE
INSTALLED BY ANYONE OTHER THAN PERSONNEL
SPECIFICALLY TRAINED IN WEIR OIL & GAS PROCEDURES.
SAFETY INFORMATION
Important! Read before attempting to use.
• It is critical that, since most SPM
®
products generate, control or
direct pressurized fluids, those who work with these products be
thoroughly trained in their proper application and safe handling.
It is also critical that these products be used and maintained
properly. Any components that show obvious signs of damage or
wear should be removed from service immediately.
• SPM
®
Flow Line Safety Restraint components are not intended
for individual use. SPM
®
FSR Ribs and Spines are not lifting
devices and should never be used as such. Any Ribs or Spines
that have been subjected to any loads should be immediately
taken out of service.