Weir SPM Flow Line, Руководство по установке

Страница: 28 / 42

28
INSTALLING SPM
®
FSR COMPONENTS
– NON-ANCHOR CROSSOVER
ASSEMBLY (ALTERNATIVE METHOD)
The following method provides an alternate method to install the
SPM
®
FSR system without Anchor Crossovers at the ends of
swivel groups (2 or more in series) and at anchor line end points by
using additional linked spines in place of the Anchor Crossovers.
This alternate method was developed as a result of feedback from
the field where some operators have mandated that flow lines can
not contain flow control components of mixed ownership. This will
occur, for example, where SPM
®
’s FSR rental services require rig
in of SPM
®
owned anchor crossovers within a service company’s
flow line.
A. Installation of SPM
®
FSR System without Anchor Crossover on
Swivel Groups
NOTE: Figure 1 shows the double swivel assemblies without any
SPM
®
FSRs installed for clarity purposes.
Figure 1. Double Swivel Assemblies without SPM
®
FSRs
Double Swivel Assembly