©
2019 WEINZIERL ENGINEERING GmbH
Page 32/41
-
Dim to last value before switching off
Behavior on ON telegram (when dimmer is on)
If the dimmer is already switched on, this parameter can be used
to configure the behavior for a new ON telegram via object 171,
231, 291 or 351.
It is available:
-
No reaction
-
Dim to fix value
-
Dim to fix value if higher than actual
Dimming value on ON telegram
This value is activated by ON telegram via object 171, 231, 291
or 351 with suitable parameterization.
Fade time on ON telegram
This fade time is active when an ON telegram is received. The
period refers to a complete dimming process of 0-100%.
Behavior on OFF telegram
This parameter describes the behavior of the dimmer when an
OFF telegram is sent via object 171, 231, 291 or 351.
It is available:
-
No reaction
-
Dim to fix value
Dimming value on OFF telegram
This value is activated by OFF telegram via object 171, 231, 291
or 351 with suitable parameterization.
Behavior on 2. OFF telegram
This parameter describes the behavior of the dimmer when a 2.
OFF telegram is received via object 171, 231, 291 or 351.
It is available:
-
No reaction
-
Switch off
The 2. OFF telegram must follow the 1. OFF telegram within 1
second in order to be evaluated. If the current brightness is
equal to or lower than the parameterized brightness for OFF tele-
gram, the device is already switched off by the 1. OFF telegram.
Fade time on OFF telegram
This fade time is active when an OFF telegram is received. The
period refers to a complete dimming process of 0-100%.
Day/night switching
When using this function, the following objects are visible for
switching between day/night mode:
Group Object Dimmer A
Type KNX
Size
Direction
GO 175 Dimmer A: Day/Night - Switch
1.001
1 Bit
From KNX
Group Object Dimmer B
Type KNX
Size
Direction
GO 235 Dimmer B: Day/Night - Switch
1.001
1 Bit
From KNX
Group Object Dimmer C
Type KNX
Size
Direction
GO 295 Dimmer C: Day/Night - Switch
1.001
1 Bit
From KNX
Group Object Dimmer D
Type KNX
Size
Direction
GO 355 Dimmer D: Day/Night - Switch
1.001
1 Bit
From KNX
Day mode is triggered with an ON telegram on object 175, 235,
295 or 355, night mode with an OFF telegram. After a restart, the
device is in day mode.
In addition, it can be determined when the values become active
after receiving a telegram on these objects, it is available:
-
Disabled
-
Switch on day/night telegram
Immediately after reception of day/night switching, it is
dimmed to the active value according to the last
switch-on/switch-off received via object 171, 231, 291
or 351.
-
Switch on next on/off telegram
The currently active value is not used until the next
switch on/off telegram via object 171, 231, 291 or 351.
There is a separate switch-on and switch-off value for night
mode in the parameters, in day mode the always visible values
are used.
Dimming value on ON telegram (night)
If the dimmer is in night mode, this value is activated by ON tele-
gram via object 171, 231, 291 or 351 and suitable parameteriza-
tion.
Dimming value on OFF telegram (night)
If the dimmer is in night mode, this value is activated by OFF tel-
egram via object 171, 231, 291 or 351 and suitable parameteri-
zation.
Fade time for day/night switching
This fade time is only active if switching on day/night telegram is
used. If switching on next on/off telegram is used, the regular
fade time of the respective on or off telegram is active. The pe-
riod refers to a complete dimming process of 0-100%.
Object Dimming rel.
The following objects are available for dimming using relative
dimming commands, if activated via parameters:
Group Object Dimmer A
Type KNX
Size
Direction
GO 172 Dimmer A: Dimming rel. -
Brighter/Darker
3.007
4 Bit
From KNX
Group Object Dimmer B
Type KNX
Size
Direction
GO 232 Dimmer B: Dimming rel. -
Brighter/Darker
3.007
4 Bit
From KNX
Group Object Dimmer C
Type KNX
Size
Direction
GO 292 Dimmer C: Dimming rel. -
Brighter/Darker
3.007
4 Bit
From KNX
Group Object Dimmer D
Type KNX
Size
Direction
GO 352 Dimmer D: Dimming rel. -
Brighter/Darker
3.007
4 Bit
From KNX
Minimal dimming value while dimming with object
This parameter can be used to set which minimum dimming
value can be achieved via relative dimming. If the current dim-
ming value is below the minimum value, the brightness cannot
be reduced via object 172, 232, 292 or 352.
Maximal dimming value while dimming with object
